The deformations in most finite element models are relatively small and would be difficult or impossible to view if they were plotted as calculated (at their true scale). The scale factor determines if and how the deformed model is displayed in comparison to its as-calculated state. Contour plots of the element solution can be created using the GUI path: Main Menu>General Postproc>Plot Results>Contour Plot>Element Solu or using the PLESOL command. For beam and shell elements, it may be necessary to issue the / ESHAPE command before creating a contour plot or to plot the results using element tables instead.Ĭontour plots of the nodal solution can be created using the GUI path: Main Menu>General Postproc>Plot Results>Contour Plot>Nodal Solu or using the PLNSOL command. Most results for continuum (e.g., PLANE and SOLID) elements can be displayed as contour plots. The colors are then mapped over the geometry to indicate the result values at each location in the model. The range of values in the results set is divided into a number of subranges (nine by default), and each subrange is assigned a color. Thompson PhD, PE, in ANSYS Mechanical APDL for Finite Element Analysis, 2017 9.8.2.1 Contour PlotsĬontour plots display the results of a single data set (time step, load step, or substep) over the model geometry.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |